Head to head
DEWALT DCW210 vs Makita XOB01Z (2027)
Head-to-head: DEWALT DCW210 versus Makita XOB01Z cordless orbit sanders on finish, control, and efficiency.
DEWALT 20V MAX XR Random Orbital DCW210
Brushless cordless orbit with dialed-in control.
- Orbit diameter: 3/32 in (2.4 mm)
- Speed: 8,000-12,000 OPM
Makita XOB01Z 18V Random Orbit
LXT cordless sanding with three speed settings.
- Orbit diameter: 1/8 in (2.8 mm)
- Speed: 7,000 / 9,500 / 11,000 OPM
Our recommendation
Buy the DCW210 for brushless efficiency, dial control, and a finer orbit. Buy the XOB01Z if your shop runs on LXT; its three speeds and pad brake remain genuinely capable.
Motor and control
DEWALT's brushless motor and continuous dial out-refine Makita's brushed motor and three step speeds. In practice the dial wins on veneer and finish passes.
Orbit character
Makita's 1/8-inch orbit removes slightly faster; DEWALT's 3/32-inch orbit finishes slightly finer. The difference shows on stain-grade work.
Runtime
Brushless efficiency gives the DEWALT more minutes per amp-hour, especially at coarse grits where motors work hardest.
Dust collection in practice
Both sanders collect through the pad into a bag, and both improve dramatically on a vacuum. The DEWALT's port and bag seal feel a touch more positive in daily swapping, while the Makita bag empties more easily. Neither difference should override your battery platform, but shops sanding indoors daily will notice the DEWALT setup sheds less fine dust around the joint.
Pads, paper, and running costs
Both take standard 5-inch 8-hole discs, so paper costs tie exactly and neither strands you in a proprietary abrasive. Replacement pads are wear items on both; the DEWALT pad's hook grip tends to be the first thing owners praise after a year, while Makita pads are stocked by every LXT dealer. Running costs, honestly, are a draw.
Choose DEWALT 20V MAX XR Random Orbital DCW210 if…
- You own DEWALT 20V MAX batteries
- Finish finesse and dial control matter
- Longest cordless runtime per charge
Choose Makita XOB01Z 18V Random Orbit if…
- You own Makita LXT batteries
- You prefer simple three-speed buttons
- Slightly faster removal on general work
Questions, answered
Which leaves fewer swirl marks?
The DEWALT, on orbit size and speed control, provided both use fresh paper and correct technique.
Can either run all day on batteries?
With two large packs rotating, project work yes. Continuous production sanding still favors corded tools.
Do both fit the same discs?
Yes, standard 5-inch 8-hole hook-and-loop discs interchange freely.
Which is better for sanding between finish coats?
The DEWALT, on dial control alone. Dropping to its lowest speeds with fine paper scuffs coats without cutting through edges, a finesse the Makita's lowest step only approaches.